|
|
|
-
|
Full
transceiver control via buttons in the software. Frequency and mode
will be polled automatically from the transceiver. So a normal tuning
on the transceiver itself will be detected and shown in the software
vfo's. |
|
|
| - |
Open
memory database with an unlimited amount of possible memories in
an overall view. The memory banks of all amateur radio bands are
visible and useable with ease at the same time. Several additional
memory banks are available. Also memory banks with the possibility
to save offset, CTCSS and rotator data are available. The rotator
data can be used to drive the ARS rotator interface or to use it
to drive easycomm-compatible hardware like rotors and much more. |
|
|
| - |
Scanning
of single memory banks, there is no need to scan all memory banks
at the same time. Your FT-1000MP transceiver has only 100 internal
memories, which must be scanned all at once. If you've saved frequencies
out of different bands and if you want to scan these memories, you
'll hear a rapid clicking of relais-type-devices in the transceiver.
It is not proved, but we're sure, that continuous long time period
scanning, will shorten the life of these relais type devices.
|
|
|
| - |
Complete
control for the clarifier. The clarifier offset and the clarifier
offset frequency will be shown in realtime in the program. Of
course you can change the values of the clarifier in the software.
|
|
|
| - |
Clone
data memory-management for the internal memories of the FT-1000MP
transceiver. FT1000MP-SuperControl is able to read, edit, archive
and send back clone files to the transceiver. It's easy to set
up different clone files and copy them on your harddrive. If you
want to use special setup's in the transceiver, simply send the
wanted clone file to the rig.
|
|
|
| - |
Original
like copy of the meter bars (s-meter, power-meter, mic-meter, comp-meter,
als-meter, vcc-meter, ic-meter, swr-meter, etc.). |
|
|
| - |
Support
of up to eight different serial ports. These ports are to be used
when converting an USB-port to a serial-port as many of the converting
software's will take COM5 for the first converted USB to serial
port. |
|
|
| - |
Logbook
- function |
|
|
| - |
Skedbook
- function |
|
|
| - |
Wave
recording of qso's or other important signals. FT1000MP-SuperControl
has the possibility to record audio signals on selectable events.
For this feature, a standard sound-card in the computer is necessary.
The recorded data will be saved automatically to a special folder
and can be replayed at any time |
|
|
| - |
Internet
based telnet dx-cluster logger shows the latest dx-spots in the
vfo-display of the software |
|
|
| - |
Full
featured vfo scanner with software based quick memory bank - function
(QMB). It's possible to set up different scan ranges.
|
|
|
| - |
Voice
announcements of frequency, mode and other important functions. |
|
|
| - |
Configurable
homechannels for each amateur radio band |
|
|
| - |
Calculated
target frequencies in two additional VFO-display’s for the use with
optional transverter-devices. The software is capable to administrate
up to three transverter- or downconverter devices and is able to
display the final frequencies in realtime. Of course we can use
these final frequencies later for the Doppler calculation in satellite
mode! |
|
|
| - |
DDE-interface
(Dynamic Data Exchange) to satellite-tracking programs (NOVA®,
Satscape® etc.) for Doppler-correction in satellite mode. The
Doppler-corrected frequency will be send to the transceiver, so
no manual tuning is needed anymore, when working satellites. RX-
and TX-VFO will be continuously updated with doppler-corrected data.
Of course, possible calculated transverter frequencies will be taken
as source for the final calculation of the doppler shift. So this
part is 100% compatible with AO-40 or other super-high frequency
satellites. Various possibilities to alter the way to calculate
the doppler shift itself are available in the settings.
|
|
|
| - |
Visual
band scope with different scan-steps and various possibilities.
For example you scan VFO1 while listening to VFO2. While having
a QSO, you can scan the bandwidth beneath your working frequency.
You can "IN-Scan-QSY" to another frequency by clicking
to a desired part in the graphic display. |
|
|
| - |
EasyComm
interface to drive a rotator or other EasyComm-compatible hardware
via special memories and the doppler correction function. FT1000MP-SuperControl
is able to track a satellite with the Help of NOVA. Azimuthal and
elevational data which is also provided by NOVA or Satscape, can
be sent via another serial port to your Easycomm-hardware or to
your ars rotator interface. So it is possible to track the satellite
perfectly with your az-el antenna-rotator. |
|
|
| - |
Automatic
10 minute station id and voice keyer |
|
|
| - |
Remote
control the FT-1000MP transceiver via TCP/IP networks possible (also
via the internet). Including Audio submission with voice over IP
(VoIP).
|
|
|
| - |
Testing
environment for undocumented cat commands. |
|
|
| - |
Full
ARS rotator interface support via DDE |
|
|
| - |
Tone
Generator and DTMF tone encoder |
|
|
| - |
DTMF
tone encoder / decoder, including dual tone generator, single tone
generator and 1750hz tone generator
* DTMF remote control is currently under development |
|
|
| - |
CW-Keyer
(keys the transceiver via another serial port).
This CW-Keyer offers lots of functions like user definable CW speed
setups, macro operation, direct input via the computer keyboard,
support for the japanese codes, etc. ! |
